Webáruház > Kijelző, Projektor, LED-fal > Installációs projektor
Kategória
Gyártók
Bérleti díj (ÁFA-val)
Kontraszt
Fényerő
Képátló
Állapot
Felbontás (pixel)
Csatlakozások
Keresett ár: tól-ig
0 Ft 105.374.848 Ft
0 Ft 105.374.848 Ft

PANASONIC PT-FW430 Installációs projektor

Installációs projektor

Installációs LCD projektor, 3500lm, 600:1 kontraszt, WXGA felbontás, WIRELESS,

762.762 Ft
Nettó: 600.600 Ft
Kiszállítás: 5 nap
Szállítási költség: 1905 Ft (1500+áfa)
2 év garancia
Kívánságlistához adom
Összehasonlításhoz adom
Boltonkénti készlet
  • 1116 Budapest, Kalotaszeg u. 28.
Árváltozás értesítő
×

Tájékoztatjuk, ha a termék ára az Ön által kitűzött ár alá került.

* Név:
* E-mail cím:
* Kívánt ár:
Küldés
Model PT-FW430 PT-FX400
Power supply 100 - 240 V AC, 3.9 - 1.4 A, 50/60 Hz
Power consumption 330 W (0.3 W at 100 - 120 V AC, 0.4 W at 220 - 240 V AC when standby mode set to eco*1,
9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.)
LCD panel Panel size 18.9 mm (0.74 inches) diagonal (16:10 aspect ratio) 20.3 mm (0.8 inches) diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (× 3, R/G/B) Transparent LCD panel (× 3, R/G/B)
Pixels 1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels 786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Pixel configuration Stripe Stripe
Lens Manual 2× zoom (throw ratio: 1.34 - 2.68:1),
manual focus F 1.7 - 2.6, f 21.6 - 43.0 mm		 Manual 2× zoom (throw ratio: 1.48 - 2.96:1),
manual focus F 1.7 - 2.6, f 24.0 - 47.2 mm
Lamp 250 W UHM lamp (The lamp replacement cycle is 6,000 hours.*2)
Screen size (diagonal) 0.84 - 7.62 m (33 - 300 inches), 16:10 aspect ratio 0.84 - 7.62 m (33 - 300 inches), 4:3 aspect ratio
Brightness*3 3,500 lm (lamp mode: normal) 4,000 lm (lamp mode: normal)
Center-to-corner uniformity*3 80%
Contrast*3 600:1 (full on/full off)
Resolution 1,280 × 800 pixels (Input signals that exceed this
resolution will be converted to 1,280 × 800 pixels.)		 1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.)
Scanning
frequency		 HDMI/DVI-I (digital) fH: 27.0 kHz - 68.7 kHz; fV: 24.0 Hz - 85.0 Hz; dot clock: 25.2 MHz - 148.5 MHz
DVI-I (analog)/RGB fH: 15 .6 kHz - 91.1 kHz; fV: 24.0 Hz - 85.1 Hz; dot clock: 162 MHz or lower
YPBPR (YCBCR) fH: 15.75 kHz; fV: 60 Hz [480i (525i)]
fH: 31.50 kHz; fV: 60 Hz [480p (525p)]
fH: 45.00 kHz; fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz; fV: 60 Hz [1080 (1125)/60i]
fH: 27.00 kHz; fV: 24 Hz [1080 (1125)/24p]
fH: 67.50 kHz; fV: 60 Hz [1080 (1125)/60p]		 fH: 15.63 kHz; fV: 50 Hz [576i (625i)]
fH: 31.25 kHz; fV: 50 Hz [576p (625p)]
fH: 37.50 kHz; fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz; fV: 50 Hz [1080 (1125)/50i]
fH: 33.75 kHz; fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video fH: 15.75 kHz; fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz; fV: 50 Hz (PAL/PAL-N/SECAM)
Optical axis shift Vertical ±51% from center of screen (manual) ±50% from center of screen (manual)
Horizontal ±24% from center of screen (manual) ±27% from center of screen (manual)
Keystone correction range Vertical: ±30°
Installation Ceiling/desk, front/rear
Built-in speaker Output power: 5.0 W (monaural)
Terminals HDMI IN HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 - 146.25 MHz;
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-I IN DVI-I 29-pin × 1
Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 - 146.25 MHz;
Analog: (RGB/YPBPR (YCBCR))
COMPUTER (RGB) IN D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1)
VIDEO IN RCA pin × 1 (composite video)
S-VIDEO IN Mini DIN 4-pin × 1 (S-Video)
AUDIO IN 1 M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 2 M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 3 RCA pin × 2 (L, R × 1), 0.5 Vrms
AUDIO OUT M3 × 1 (L, R × 1) (monitor out: 0 - 2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 × 1
Cabinet materials Molded plastic (PC+ABS)
Dimensions (W × H × D) 430 × 125.5*4 × 323 mm (16 - 15/16˝ × 4 - 15/16˝ *4 × 12-23/32˝ ) (Protruding parts not included)
Weight Approximately 6.0 kg (13.2 lbs.)
Operating environment Operating temperature: 0°C - 40°C (32°F - 104°F)*5; operating humidity: 20% - 80% (no condensation)
Supplied accessories Power cord, wireless remote control unit, batteries (AA type for North America, R6/LR6 type for Europe and Asia) x 2, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5)
  • *1 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
  • *2 This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals.
  • *3 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
  • *4 With legs at shortest position.
  • *5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in High- Altitude mode (1,400 m to 2,700 m (4,593 ft to 8,858 ft)).
NOTES ON USE
1 Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
2 The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3 The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
5 Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.
Fényerő
3001-4000 lm 3500 lm
Kontraszt
5 000:1 alatt 600:1
Felbontás (pixel)
1280 x 800, WXGA igen
Csatlakozások
Wi-Fi igen
HDMI igen
Írja meg véleményét
Az Ön neve:


Az Ön véleménye: Megjegyzés: A HTML-kód használata nem engedélyezett!

Értékelés: Rossz            Kitűnő

Másolja be a lenti kódot:



Küldés
Tegye fel kérdését Nekünk!
Megjegyzés: A HTML-kód használata nem engedélyezett!
Küldés
© 2015-2024 Panashop - Videopart Minden jog fenntartva.