Kategória
Gyártók
Bérleti díj (ÁFA-val)
Állvány típus
világítás
Fényképezőgép típus
Hűtőtér űrtartalom
Fagyasztótér Űrtartalom
Csatornák száma
Kontraszt
Rögzítés típusa
Pengék száma
Akkumulátor / töltő típus
Minimális megvilágítás
Tárhely méret
Energiahatékonyság
Mikrofon típus
Optika típus
Sebesség
Fényerő
Típus
Optikai zoom
BOX Kamerák
Képátló
Állapot
PTZ Kamerák
Felbontás (pixel)
Képérzékelő méret
IP Kamerák
Kivitel
Csatlakozások
Felvételi mód
IP PTZ Kamerák
Mikro Teljesítmény
Szín
Képérzékelő
Extra funkciók
Keresett ár: tól-ig
0 Ft 1.300.000 Ft
0 Ft 1.300.000 Ft

PANASONIC PT-EX800Z Panasonic PT-EX800Z projektor 7.500 lm XGA

Installációs LCD projektor, 7500 lm, XGA felbontás, 5000:1 kontraszt,

1.268.016 Ft
Nettó: 998.438 Ft
Boltonkénti készlet
  • 1116 Budapest, Kalotaszeg u. 28.
Árváltozás értesítő
×

Tájékoztatjuk, ha a termék ára az Ön által kitűzött ár alá került.

* Név:
* E-mail cím:
* Kívánt ár:
Model PT-EZ770Z / EZ770ZL* PT-EW730Z / EW730ZL* PT-EX800Z / EX800ZL*
Power supply 100-240 V AC, 50/60 Hz
Power consumption 590 W (0.3 W when
STANDBY MODE
set to ECO*1,
10 W when
STANDBY MODE
set to NORMAL
(37 W when STANDBY MODE
of AUDIO SETTING set to ON))
575 W (0.3 W when STANDBY MODE set to ECO*1,
10 W when STANDBY MODE set to NORMAL
(37 W when STANDBY MODE of AUDIO SETTING set to ON))
LCD panel Panel size 19.0 mm (0.76 in)
diagonal
(16:10 aspect ratio)
20.0 mm (0.79 in)
diagonal
(4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix
Pixels 2,304,000
(1,920 x 1,200) x 3,
total of 6,912,000 pixels
1,024,000
(1,280 x 800) x 3,
total of 3,072,000 pixels
786,432
(1,024 x 768) x 3,
total of 2,359,296 pixels
Lens PT-EZ770Z/
EW730Z/
EX800Z
Powered zoom (throw ratio 1.7-2.8:1), powered focus F 1.7-2.3, f 26.9-45.4 mm
PT-EZ770ZL/
EW730ZL/
EX800ZL
Optional powered zoom/focus lenses and fixed-focus lens
Lamp 400 W UHM lamp x 1,
lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 3,000 hours/4,000 hours/4,500 hours*2
Screen size (diagonal) 1.02-10.16 m (40-400 in),
1.52-10.16 m (60-400 in) with the ET-ELW22,
16:10 aspect ratio
1.02-10.16 m (40-400 in),
1.52-10.16 m (60-400 in)
with the ET-ELW22,
4:3 aspect ratio
Brightness*3 6,500 lm
(lamp power:
Auto/Normal,
Dynamic mode,
Standard lens)
7,000 lm
(lamp power:
Auto/Normal,
Dynamic mode,
Standard lens)
7,500 lm
(lamp power:
Auto/Normal,
Dynamic mode,
Standard lens)
Center-to-corner uniformity*3 90 %
Contrast*3 5,000:1 (full on/full off, lamp power: Auto, iris: On)
Resolution 1,920 x 1,200 pixels*4 1,280 x 800 pixels*4 1,024 x 768 pixels*4
Scanning frequency DVI-D/
HDMI/
DiplayPort/
DIGITAL LINK
Dot clock: 25-162 MHz
(VGA: 640 x 480 pixels to WUXGA: 1,920 x 1,200 pixels, VESA CVT-RB compliant)
RGB fH: 15-91 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
(Signals exceeding the dot clock rate of 162 MHz are downsampled.)
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5 Vertical ±60 % (±50 % with the ET-ELW22)
from center of screen (powered)
±50 %
(±35 % with the ET-ELW22)
from center of screen (powered)
Horizontal ±10 % from center of screen (powered)
Keystone correction range*6 Vertical ±40°, horizontal ±30°
Installation Ceiling/floor, front/rear
Built-in speaker 3.7 cm round shape x 1, output power 10.0 W (monaural)
Terminals DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP,
compatible with single link only)
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP),
audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
DisplayPort IN DP-20P x 1 (DisplayPort 1.1, compatible with HDCP),
audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
RGB 1 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
RGB 2 IN BNC x 5 (RGB or YPBPR/YCBCR/YC/VIDEO IN x 1)
shared with VIDEO IN (S-video/composite video)
VIDEO IN Pin jack x 1 (composite video)
MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB x 1) (not compatible with all inputs)
AUDIO IN Pin jack x 2 (L/R x 1), M3 x 2 (L-R x 2)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN /
DIGITAL LINK
RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection,
100Base-TX, compliant with PJLink™, HDCP compatible, Deep Color compatible)
Operation noise*2 37 dB (lamp power: NORMAL), 31 dB (lamp power: ECO 1), 29 dB (lamp power: ECO 2)
Filter x 1, recommended replacement cycle: 15,000 hours*7
Cabinet materials Molded plastic (PC + ABS)
Dimensions
(W x H x D)
PT-EZ770Z/
EW730Z/
EX800Z
530 x 177*8 x 445 mm (20-7/8 x 6-31/32*8 x 17-1/2 in) (with supplied lens)
PT-EZ770ZL/
EW730ZL/
EX800ZL
530 x 177*8 x 385 mm (20-7/8 x 6-31/32*8 x 15-5/32 in) (without lens)
Weight*9 PT-EZ770Z/
EW730Z/
EX800Z
Approximately 10.6 kg (23.4 lbs) (with supplied lens)
PT-EZ770ZL/
EW730ZL/
EX800ZL
Approximately 9.8 kg (21.6 lbs) (without lens)
Operating environment Operating temperature: 0-45 °C (32-113 °F)*10,
operating humidity: 10-80 % (no condensation)
Supplied accessories Power cord (including power cord holder) x 1*11, wireless/wired remote control unit x1,
batteries for remote control (AAA/R03/LR03 type) x 2, software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software) x 1
  • * The PT-EZ770ZL/EW730ZL/EX800ZL delivers the same performance as the PT-EZ770Z/EW730Z/EX800, but comes without a lens.

    *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
    *2 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
    *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
    *4 Input signals that exceed the native resolution will be converted to the native resolution.
    *5 The axis shift function cannot be used with the ET-ELW21.
    *6 With the supplied lens. Value differs when the correction for both directions is operated.
    *7 The usage environment affects the duration of the filter.
    *8 With legs at shortest position.
    *9 Average value. May differ depending on models.
    *10 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level. Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) at high altitude), the LAMP POWER may be automatically switch to Eco 2 to in oeder to protect the projector.
    *11 Power cords available (x2) for the UK and Asia only.
NOTES ON USE
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a loud sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being recirculated into the intake opening.
4. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
• The usage environment affects the lamp replacement cycle.
5. Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
Fényerő
7001-8000 lm 7500 lm
Kontraszt
5 000:1 alatt 5000:1
Felbontás (pixel)
1024 x 768, XGA igen
Csatlakozások
HDMI igen
Írja meg véleményét
Az Ön neve:


Az Ön véleménye: Megjegyzés: A HTML-kód használata nem engedélyezett!

Értékelés: Rossz            Kitűnő

Másolja be a lenti kódot:



Tegye fel kérdését Nekünk!
Megjegyzés: A HTML-kód használata nem engedélyezett!
© 2015-2024 Panashop - Videopart Minden jog fenntartva.